AUTOMATION AND CONTROL

TECHNICAL PROGRAM COMMITTEE

Jorge R. Vega

Jorge R. Vega

Jorge Rubén Vega graduated in 1985 as an Electrical Engineer (National University of La Plata, Argentina), and in 1993 as a Doctor in Chemical Technology (National University of the Litoral, Santa Fe, Argentina). He is Principal Investigator of CONICET at the “Institute of Technological Development for the Chemical Industry – INTEC” (Santa Fe, Argentina), dependent on the National Council for Scientific and Technical Research (CONICET) and the National University of the Litoral (UNL). At the National Technological University (UTN), Santa Fe Regional School (FRSF), he currently works as Associate Professor of the subject “Automatic Control” and as Director of the Area “Electronics and Control Systems”, in the Department of Electrical Engineering; and as Professor of Postgraduate courses in the Control area. He is Director of the “Center for Research and Development in Electrical Engineering and Energy Systems – CIESE” (UTN, FRSF). He is the Director of the Postgraduate Program “Specialization in Electric Energy” (UTN, FRSF). He also directs postgraduate scholarship holders and doctoral thesis, having directed research and development projects funded by Conicet, the National Agency for the Promotion of Scientific and Technological Research, the UNL, the UTN, etc. He is a Faculty Advisor of the IEEE Student Branch of the UTN-FRSF. His research topics involve modeling, estimation, control and optimization of processes, inverse problems in engineering, and electrical networks with integration of renewable energies, among others. In institutional management activities at the UTN-FRSF, he was Academic Undersecretary; He is currently a Board Member, a Director of the Department of Electrical Engineering, a member of the Graduate Commission, and a member of several Academic Committees for Graduate Careers. He is also a member of the Graduate Commission of the UTN.
Julián A. Pucheta

Julián A. Pucheta

J. A. Pucheta received the Electrical Engineering degree from National Technological University – Córdoba Regional Faculty, Argentina, the M.S. and Ph.D. degrees from Universidad Nacional de San Juan, Argentina, in 1999, 2002 and 2006, respectively. He is currently Professor at Mathematics Research Laboratory applied to Control (LIMAC), Universidad Nacional de Córdoba, Argentina. His research interests include stochastic and optimal control, time series forecast and machine learning. IEEE member.

Image source.

ChairCo-Chair

DISTIGUISHED LECTURERS

Julio E. Normey-Rico

Julio E. Normey-Rico

Julio Elias Normey-Rico received the Ph.D. degree in robotics, automation and electronics from the Department of System Engineering and Automatic Control, University of Seville, Seville, Spain, in 1999.,He is currently a Full Professor with the Department of Automation and Systems Engineering, Federal University of Santa Catarina, Florianópolis, Brazil; a Researcher of the Brazilian National Council for Scientific and Technological Development, Braslia, Brazil, and the Director of several projects with industry in Brazil. His current research interests include model predictive control, PID control, dead-time systems and process control applications. He is the author or coauthor of about 260 conference and journal papers, the book Control of Dead-Time Processes (Springer, 2007), and has supervised 60 Ph.D./M.Sc. graduates.(Based on document published on 22 June 2018).

Pedro Abertos

Pedro Abertos

Distinguished speakerDistinguished speaker

DESCRIPTION

Fields of interest in this program lie in theory, design, optimization and applications of dynamic systems and control, including: elements of detection, communication, decision and action components, as relevant for the analysis, design and operation of dynamic systems and control. Considered systems include: technological, physical, biological, economic, organizational and other entities, and their combinations. There is a centrality in theoretical and technological foundations of the discipline.

SUGGESTED SUBTOPICS
For this topic, the following subtopics are suggested. Please note that you may send your paper beyond the scope of this list. In such a case, you must specify, in submission web form, the new subtopic that you consider your paper belongs to, as per instructions in Tutorial for Paper Submissions., under the paragraph How to specify a subtopic that is not predefined.
  • Advanced and Intelligent Control.
  • Automatic Control Systems.
  • Control Education.
  • Control Theory.
  • Fault Detection and Identification.
  • Industrial Applications of Control Systems.
  • Modeling and Simulation of Dynamic Systems.
  • Non-Linear Control.
  • Other Automation and Control Systems.
  • Process Control.
  • Process Monitoring and Monitoring.
  • Systems Identification.

ACCEPTED PAPERS

IDTítulo (Title)Autor (Author)Programa (Track)
51Weather sensor fault detection in meteorological mastsVisco Comandini, Filippo • Piergallini Guida, Franco • Iaconis, MaximoAUTOMATION AND CONTROL
54Full-order Output Observer Applied to a Linear Parameter Varying System with Unknown InputBernardi, Emanuel • Pipino, Hugo • Adam, EduardoAUTOMATION AND CONTROL
65Predictive Control Methods for Multi-Model SystemsPipino, Hugo • Bernardi, Emanuel • Cappelletti, Carlos • Adam, EduardoAUTOMATION AND CONTROL
68Model-based methodology coupled with a Laser-based experiment for a Non-Destuctive thermal parameter estimation of an Epoxy nanocompositeOtero, Fernando A • Altuna, Facundo • Hoppe, Cristina • Arenas, Gustavo • Antonacci, Julian • Chiuro, Carlos • Puig, Julieta • André, Pontis • Frontini, Gloria • Elicabe, GuillermoAUTOMATION AND CONTROL
74Implementation of a Constrained Iterative MPC Controller and State Estimator Applied to an Electric Wheelchair ControlScarone, Norberto • Monte, Gustavo • Bufanio, RubenAUTOMATION AND CONTROL
91Stabilization of Artificial Gas Lift System Using Nonlinear Model Predictive Control with input Target and Control Zones.Adukwu, Ojonugwa • Odloak, Darci • Kassab Junior, FuadAUTOMATION AND CONTROL
94Description of an IoT system for the measurement and recording of air qualityVolentini, Esteban • Albaca Paraván, Carlos • Younes, José • Saade, Sergio • Tek, Luis • Gómez López, María De Los AngelesAUTOMATION AND CONTROL
95Germination chamber telemetry hydroponics in greenhouses using IoT and MQTT protocolMarinelli, Marcelo J • Kurtz, Myriam • Urquijo, Rubén • Wurm, GuillermoAUTOMATION AND CONTROL
100Contractive Method for identification of Nonlinear Regressors in Dynamic SystemsRodrigo, Rodolfo H. • Patino, Héctor D • Schweickardt, GustavoAUTOMATION AND CONTROL
107Design of a multivariable PID controller coupled with genetic algorithms in a UAV.López, Mariana • Cortés, Adrián • Giraldo, EduardoAUTOMATION AND CONTROL
130State Estimation of Rotary Inverted Pendulum:
A Comparative Study of Observers Performance
Humaidi, Amjed J • Ali, Abdullah • Hameed, Akram • Ibrahim, Asst. Prof. Dr. Ibrahim Q • Azar, Ahmad • Qasim, AyadAUTOMATION AND CONTROL
139Automatic Dial Comparator Reading using Image ProccessingDucloux, José • Lezama, JavierAUTOMATION AND CONTROL
148Deep Learning to Identify Exothermic Processes in Phenol-Formaldehyde resin manufacturingMedina-ramos, Carlos • Carbonel-olazabal, Daniel • Betetta-gomez, JudithAUTOMATION AND CONTROL
158Induction Motor Parameter Identification using Least Squares with Low-pass FilterSantoyo, DavidAUTOMATION AND CONTROL
165Adaptive Backstepping Controller with Output Feedback for Dielectric Elastomer ActuatorBernat, JakubAUTOMATION AND CONTROL
172Fault Detection and Clasification Using Support Vector Machines and Error Correcting Output Codes in Soft-SensorSanseverinatti, Carlos I • Sangoi, Emmanuel • Clementi, Luis • Vega, Jorge RAUTOMATION AND CONTROL
182Control of COVID-19 Outbreak for Preventing Collapse of Healthcare Capacity based on Social Distancing, Confinement and Testing-QuarantiningPatino, Héctor D • Tosetti, Santiago • Pucheta, Julián A. • Rodriguez Riveros, CristianAUTOMATION AND CONTROL
190Analysis and modeling of dynamic processes for measuring social behavior change in the framework of COVID-19Pucheta, Julián A. • Salas, Carlos • Herrera, Martín • Patino, Héctor D • Rodriguez Riveros, CristianAUTOMATION AND CONTROL
204Development of a system for the recording of thermodynamic variables in a refrigeration equipmentRoffé, Federico • Lombardero, Oscar Guillermo • Sanchez, Guillermo RubenAUTOMATION AND CONTROL
215Integration of IoT energy meters to a traditional Building Management SystemGaspoz, Pablo S • Torres, José L • Vigil, Andrés • Espinoza, SandraAUTOMATION AND CONTROL
258Design of a hierarchical control system on air conditioning equipment based on power demand in an educational building.Torres, José L • Bardus, Nicolás • López, Diego Carlos • Marelli, PabloAUTOMATION AND CONTROL
261Sensor Fault Detection System With Improved Robustness Against Parametric Variations for Induction Motor DrivesAguilera, Facundo • Venghi, Luis E. • De La Barrera, Pablo M. • De Angelo, Cristian H.AUTOMATION AND CONTROL
325Remote Embedded Systems LaboratoryTobar, M. Sebastián • Taffernaberry, Carlos • Pérez Monte, Cristian • Mercado, Gustavo JoseAUTOMATION AND CONTROL
326To be determinedPernia, Eric NicolásAUTOMATION AND CONTROL
328Development of a Wireless Traffic Light Controller System, with Real-Time Traffic Monitoring and Green Wave Coordination applied to Smart Cities
Oliveira, Luiz Fernando Pinto De • Luz, Paulo Denis Garces Da • Manera, Leandro TiagoAUTOMATION AND CONTROL
330TBDCatuogno, Carlos • Catuogno, Guillermo • Bosso, Jonathan • Garcia, GuillermoAUTOMATION AND CONTROL
334Modular load bank for electric power generators.Boher, José • Mazzoletti, Manuel Armando • Neuendorf, CristianAUTOMATION AND CONTROL
335Control of COVID-19 Outbreak for Preventing Collapse of Healthcare Capacity based on Social Distancing, Confinement and Testing-QuarantiningPatino, Héctor D • Tosetti, Santiago • Pucheta, Julián • Rodriguez Riveros, CristianAUTOMATION AND CONTROL